AVer announced the CL02 PTZ controller on 10 November in Taipei, with the European launch following a day later. The headline number is 255: that is how many PTZ cameras the console will address over IP from a single operating position, with NDI HX2 support for network-based control. Four dedicated LCD panels show connection status, channel, exposure, white balance and gain, so the operator reads state instead of guessing at it. There are camera-select buttons, one-touch preset recall, independent zoom control and a two-axis joystick, and the unit takes Power over Ethernet and carries an embedded web interface for remote configuration. AVer positions it for organisations that already own cameras and want centralised control without replacing installed equipment.
The interesting shift is not the camera count but the category. A camera controller used to be a serial device: a joystick box on a chain, with a handful of addresses and a limit that everyone worked around by adding another chain. Now it is a network appliance. It has an IP address, a PoE draw, a firmware version, a web UI with a login, and a discovery protocol. That reclassifies it in the documentation, because it belongs on the control VLAN with the touch panels and the DSP rather than in the media path with the encoders, and because somebody now has to own its credentials. It also means the failure mode is different: if the controller dies mid-show the cameras keep their last position, but nobody can move them, and the recovery is a network login rather than swapping a cable.
Scale is the second shift, and it is really an attention problem. A 255-camera ceiling is generous for a church and modest for a stadium or a legislature, but in both cases the limiting factor is the number of operators, not the number of addresses. That makes two details matter more than the spec sheet suggests. The first is where presets live. If they are stored in the controller, a camera swap or a controller replacement means rebuilding a show file from memory; if they are stored in the cameras, the controller is disposable but the presets inherit the camera firmware. Either way it has to be written down, exported and kept somewhere other than the gallery PC. The second is the naming and numbering scheme, because 255 channels of PTZ-01 through PTZ-255 is not a plan, it is a list. Group by room, by sightline or by operator, and put the same labels on the patch panel and in the drawing.
A camera controller is also a monitoring problem, which is why it rarely travels alone. Someone has to see what the cameras see while the joystick moves, and that is a multi-viewer job rather than a controller job. Amtune builds the surrounding layer with HD video multi-viewers that put twelve or sixteen feeds on one screen with labels and audio meters, seamless hybrid matrices that route program, preview and overflow without a black frame, HDBaseT extenders for the run to a remote press position, and presentation switches where the same room also has to show a laptop. The joystick is the part everyone remembers. The rest is what makes it usable at 250 cameras.
In a bowling centre the AV is revenue equipment:
A supermarket is a signal chain problem before i
AVer announced the CL02 on 10 November: 255 PTZ
Contact: Brook Fan
Phone: +86 159 8665 0800
Tel: +86 755 8427 8955
Email: sales@amtune.com
Add: Building A No. 6 Xiacun First Industrial Area Gongming Town Guangming Shenzhen City, China.