On 6 November Bose Professional introduced the MA3 Micro Array, a passive modular column for fixed installation. Each module measures 138 by 288 by 206 mm and weighs 3.5 kg in a white ABS enclosure with a powder-coated steel grille, and carries one 1-inch compression driver and four 2.25-inch woofers behind a passive two-way crossover at 1.8 kHz. Power handling is rated at 50 W continuous and 200 W peak, with a recommended 70 Hz high-pass filter at a minimum of 24 dB per octave. Modules join with integrated quick-pin hardware, splay is adjustable, and connection is a pluggable Euroblock terminal. Bose sells singles and four-packs, offers an MA3SB suspension bracket, an MA3WB wall kit and an MA3PBB pullback kit, and positions the product for worship, meeting rooms, lobbies, education and hospitality. Price, maximum SPL and frequency response were not published, and the data sheet is still marked preliminary.
The number that matters is vertical coverage: 100 degrees horizontally and five degrees vertically for a single module. A lone box is not a loudspeaker in any useful sense, it is a slice, and the array is built by stacking slices and setting the angle between them. That makes coverage a mechanical decision, taken once, on a lift, at commissioning, and not something a later EQ can repair. It is also the reason this class of product works in reverberant rooms: the energy goes at people rather than at a ceiling that will only give it back 300 milliseconds later.
Three consequences land on the signal chain. First, one amplifier channel now drives several modules, so the channel count is low and the impedance and 70/100 V decision is made per array rather than per box, which also means a single channel failure is a whole column failure. Second, a passive crossover does not protect drivers, so the high-pass filter and the limiter live in the amplifier or DSP, and the manufacturer's presets help without being compulsory, which is exactly the situation where protection quietly does not get set. Third, the networked audio endpoint is at the amplifier, not at the column, so a Dante or AES67 design follows the rack and not the ceiling, and the cable run that matters is the one from rack to loudspeaker, not from switch to rack.
The installation questions are equally practical. At what height does the array actually clear the sightline to a screen, and what happens when seating is later re-planned and the splay no longer points at anyone? Is there a pullback point for a wall-mounted column in a room with children in it? Does the room have a ceiling that will take a suspension load, or does the design fall back to wall mount and accept a shorter array? Amtune supplies the electronics behind the column, with Dante and AES67 audio interfaces for zone distribution, Dante audio modules for amplifier and OEM integration, AES67 modular I/O for rooms that still start from analog, a DAC and preamplifier stage where program audio needs a clean front end, and signal converters for the laptop that arrives with the wrong output. Coverage is designed in the air; the protection that keeps it working is designed in the rack.
In a bowling centre the AV is revenue equipment:
A supermarket is a signal chain problem before i
AVer announced the CL02 on 10 November: 255 PTZ
Contact: Brook Fan
Phone: +86 159 8665 0800
Tel: +86 755 8427 8955
Email: sales@amtune.com
Add: Building A No. 6 Xiacun First Industrial Area Gongming Town Guangming Shenzhen City, China.