Extron is now shipping the DTP3 T 321, a USB-C transmitter that carries video, audio, USB data, power and bidirectional RS-232 up to 100 metres over a single shielded CAT 6A cable. On the table end there is a USB-C input and a local HDMI output; on the far end there are two USB device ports and remote power for the matching DTP3 receiver. Video goes to 4K at 60 Hz with 4:4:4 sampling, uncompressed, with EDID Minder and HDCP 2.3 in the path. USB data runs at 10 Gbps. Charging is rated at 60 W as standard, and up to 100 W once the UPI 100 power inserter is added at the rack.
That last sentence deserves a second reading, because it is the one integrators skim. The headline number is 100 W; the shipping configuration provides 60 W. A modern 14-inch business laptop with a discrete GPU will pull more than 60 W under load, so the same desk will charge one machine slowly and hold another at its current state of charge while it runs flat out. Either the inserter goes into the bill of materials, or the client hears about it in the first week. Deciding which of those happens is a design task, not a procurement task.
The electrical consequences reach further than the laptop. A desk that delivers 100 W per seat turns a meeting table into a branch circuit: eight seats is 800 W of continuous load inside furniture, with the heat trapped in a closed box under a lid. Wall boxes need ventilation or a metal chassis that can dissipate it, and the rack that hosts the inserters needs to be counted in the room UPS, the thermal calculation and the breaker schedule. Then there is the signal side. Ten gigabits of USB 3.2 alongside uncompressed 4K60 in the same jacket is exactly where cheap patch leads and untested connectors fail, and where a 100-metre run quietly becomes 40. Shielded CAT 6A, solid copper, tested terminations, and a cable certifier on site before the furniture is bolted down.
Amtune builds the two ends of that chain for rooms that do not need a 100-metre pull. The compact HDMI and USB-C switches keep the table free of dongles, HDBaseT and CAT extenders move the signal to the display without a repeater, and the converter range handles the legacy sources that always appear in a refurbishment. What the DTP3 makes clear is that the desk cable is no longer a passive object. It has a power budget, a thermal budget and an acceptance test, and it belongs on the drawings with the rest of the electrical work.
A command vehicle is a data centre that gets dri
A winery or taproom is three venues behind one d
d&b's MVR Exchange lets ArrayCalc import and exp
Contact: Brook Fan
Phone: +86 159 8665 0800
Tel: +86 755 8427 8955
Email: sales@amtune.com
Add: Building A No. 6 Xiacun First Industrial Area Gongming Town Guangming Shenzhen City, China.